Wood Chip Pallet Hydraulic Press Utilizing a hydraulic […]
| Dimensions: | 1200 x 1000 x 150mm |
| Weight Capacity: | 1500 kg (static) |
| Material: | Compressed Wood Chips |
| Color: | Natural Wood |
Wood Chip Pallet Hydraulic Press
Utilizing a hydraulic system to deliver high pressure, this press mixes pre-treated biomass waste such as wood chips and straw with binding agents before injecting the mixture into molds. The material is then cured and formed under high temperature and pressure.
High-Efficiency Molding:
The 1250-ton equipment completes pressing a single pallet within 7-10 minutes, achieving a daily output of 150-240 pieces to meet large-scale production demands.
Synchronized positioning and rapid pressurization technology (e.g., full pressure attainment within 35 seconds) significantly shortens production cycles.
Material Adaptability:
Processes diverse waste materials including wood chips, rice husks, straw, and bamboo, reducing raw material costs by over 40%.
Molded pallets achieve a density of 900 kg/m³ with a load-bearing capacity of 3 tons, complying with ISPM 15 international quarantine standards.
Automation and Intelligence:
PLC control systems enable one-button operation, automatically completing the entire process including pressurization, pressure maintenance, and demolding.
Servo drive technology reduces energy consumption by 20-50% and extends hydraulic system lifespan by 30%.
I. Raw material preparation Choose suitable raw materials, such as wood shavings, plant straw and so on. Preliminary processing of raw materials, including cutting, chipping and other steps for subsequent crushing and mixing.
2, crushing and mixing The preliminary processed raw materials are crushed to the appropriate particle size and automatically proportioned for transfer as required. Mixing of the proportioned raw materials with adhesives. The mixing process should ensure that the adhesive is evenly distributed in the raw material to improve the strength and stability of the pallet.
3, drying and cooling The mixed raw materials are dried at high temperature to reduce their moisture content to ensure the stability and quality of the pallet in the moulding process. After drying, the raw material should be cooled for subsequent moulding operations.
4.Moulding The dried and cooled mix is conveyed to the laying machine in set quantities. The spreader spreads the mix evenly in the mould in preparation for moulding. A hydraulic press for wood chip pallets is used to apply high temperature and pressure to the mix in the mould. The hydraulic press provides a strong compressive force that binds and cures the mix in the mould. After moulding, the pallet is automatically removed from the mould.
Molded pallet hot press is a new type of molded pallet production equipment, the use of hot pressing process of one-time molding, pallet hydraulic press has the advantages of high efficiency, one-time molding, material saving, high strength, environmental protection and energy saving. Depending on the size of the pressed pallet flower pattern, can be configured with different molds, specific can consult customer service.
